Kinetix 6000 Troubleshooting and Project Interpretation

Course Purpose

This course is intended to provide you with the skills required to diagnose common problems on a Kinetix 6000 system. During class, you will practice operating and troubleshooting the system through hands-on exercises using RSLogix™ 5000 software.

Building upon the skills developed in the Fundamentals of Motion Control (CCN130) course, you will learn how to maintain and troubleshoot a multi-axis motion control system. You will practice identifying faults related to hardware and software by employing methods such as fault code tables, system LEDs, and other status indicators.

Upon completion of this course, you will be able to apply maintenance and troubleshooting techniques to diagnose and correct common problems on a Kinetix 6000 system.

Who Should Attend

Individuals who need to maintain and troubleshoot Kinetix 6000 motion control systems should attend this course.


To successfully complete this course, the following prerequisites are required:

  • Ability to perform basic Microsoft® Windows® tasks
  • Completion of the Motion Control Fundamentals course (Course No. CCN130) or equivalent knowledge of or experience with drives, feedback devices, and velocity and position loop systems
  • Completion of the RSLogix 5000 Level 1: ControlLogix System Fundamentals course (Course No. CCP146) or equivalent knowledge of or experience with the ControlLogix platform and basic ladder logic.


Day 1
  • Identifying Kinetix 6000 System Components
  • Connecting a Kinetix 6000 Servo System
  • Interpreting Kinetix 6000 System LEDs and Status Indicators
  • Analyzing Fault Codes in a Kinetix 6000 System
Day 2
  • Using Fault Routines in a Logix5000 SERCOS Motion Control Application
  • Interpreting and Monitoring Motion Instructions in an RSLogix™ 5000 Project
  • Troubleshooting General Kinetix 6000 System Problems and Replacing Components
  • Integrated Practice: Troubleshooting a Basic RSLogix 5000 Project on a Kinetix 6000 Servo System

Additional Information:

Class begins at 8:30 a.m. and ends at 4:30 p.m. Times are approximate. Due to COVID-19, the classes may be held at an offsite location near the branch listed on the schedule. Exact times and the location of the class will be sent in your confirmation email from Rockwell Automation.

Class location
1699 Wierengo Drive
Muskegon, MI 49442

Download Flyer

Back to Class List


We will contact you to confirm your spot and for payment upon receiving your registration request.